Flush Stud 3/8" Stainless Steel all threaded posts screwed into rear of the letters.  A full size paper mounting template with stud locations marked is also provided. Used for mounting to any flat surface.  Simply mount the template with masking tape to wall or substrate and drill 1/4" holes where indicated. Next, screw studs into the back of the pre-drilled letters, coat with silicon adhesive and press fit the letters into the holes drilled in step one. That is all that's required for perfect spacing and alignment every time.  Recommended for exterior use and on permanent signage.  Specify stud length when ordering.	Pad. Used in conjunction with silicone adhesive for sticking to walls and substrates. Mainly used in drywall applications where you desire to stand the letters away from the wall. Not recommended for letters under 6" tall or where the letters have thin strokes where the pad may be visible when viewed from the front. Specify stud length when ordering.
Stud & Spacer. 3/8" Stainless Steel all threaded posts screwed into rear of the letters with a nylon spacer that slips over the stud to allow stand off from wall. Spacers come in 1/2" - 3/4" and 1" lengths.  Used where a standoff effect are needed or where the letters are mounted to a non flat surface ie: corrugated metal or lap siding. Specify stud length and spacer length from the dropdown boxes when ordering.	Keyholes. Ideal for interior mounting on drywall where a minimum amount of damage to walls is desired. Also makes letters easily removable. Comes with full size paper alignment template with pre marked keyholes for screw placement. Keyholes can only be cut on letters that are a minimum of 1/2" deep and have sufficient space to make the cut.  Not recommended for outside use as water may collect in the keyhole.
Alignment template. Comes free as shown with mounting hole locations if studs, stud spacer or keyhole option is chosen. Alignment template only option:  Does not have mounting hole locations and is not provided unless ordered. Templates over 12" tall come in panels that require assembly.